2n M2M Solution 2N SmartCom - Quick guide, 1645 v1.1. Manuale Utente Scaricare il pdf

SmartCOM Quick Guide

Read the User Manual carefully to get familiar with all system functions.

Security Precautions

 Do not switch on 2N

SmartCOM in the vicinity of

medical apparatuses to avoid interference. The

minimum distance of the antenna and pacemakers

should be 0.5m.

 Do not switch 2N

SmartCOM aboard a plane.

 Do not switch 2N

SmartCOM near petrol stations,

chemical facilities or sites where explosives are

used.

 Any mobile telephone use prohibition based on RF

energy radiation applies to 2N

SmartCOM too.

 2N

SmartCOM may disturb the function of TV sets,

radio sets and PCs.

 Warning! 2N

SmartCOM contains components that

can be swallowed by small children (SIM card,

antenna, etc.).

 When 2N

SmartCOM comes to the end of its

operational life, dispose of it in accordance with

applicable regulations.

 2N

SmartCOM is equipped with an external

antenna connector. The antenna has to be located

indoors for safety reasons.

A SmartCOM delivery contains the

following:

SmartCOM

1 pc

Antenna

1 pc

Supply adapter

1 pc

8-pin terminal board

1 pc

Product CD

1 pc

 Do not place the unit near heat sources

(such as space heaters, hot air

heaters, etc.) unless absolutely

necessary.

 2N

SmartCOM only works reliably

under the conditions specified in the

operating instructions. Any

unauthorised interventions and/or

changes in use and operation may

result in malfunction or destruction of

the product.

Basic Functions

 2N

SmartCOM is designed for bidirectional data

transmission between serial ports and their

opponents based on GPRS data transmission

via the GSM network.

Installation Conditions

 Install the GSM antenna with respect to the

signal quality in the location.

 Keep 2N

SmartCOM off sensitive devices and

human bodies to avoid EM interference.

External Antenna Connection

Screw the enclosed antenna into the SMA

antenna connector. Tighten the antenna

connector gently with your hand, never use a tool!

SIM Card Installation

Insert the SIM card in the hole in the upper part of

SmartCOM making sure that the bevelled

edge of the SIM card faces the green connector

(see the figure on the front side of the product).

Remember to set the relevant provider’s services

(PIN request, e.g.) on your mobile phone before

inserting the SIM card in 2N

SmartCOM. Make

sure that the provider’s SIM card is intended for the

GSM network supported by your 2N

SmartCOM

version and that the GPRS data transmission is

activated with an IP address enabling incoming

connection (unless you use the 2N

SmartCOM

server).

Power Supply

SmartCOM is DC supplied from a 12V/0.5A

power adapter included in the delivery. The use

of any other adapter may damage

SmartCOM. Do not connect the power

supply until you have connected the antenna to

avoid the GSM module damage!

Initialisation

Once you connect the power supply, the GSM

module, inputs, outputs, serial interfaces and

configuration module will get initialised.

SmartCOM can be regarded as functional if

the LED indicator signalling GSM connection and

IP address assignment (or connection to the

server in the TCP Client mode) keeps shining

constantly. Refer to the LED Statuses table

below for initialisation and operation details.

LED Statuses

No light

Device not supplied

Three fast flashes

Start or restart

Slow blinking

Connecting to network, starting GPRS, connecting to 2N

SmartCOM Server

Very fast blinking

Error: wrong PIN or SIM not inserted

Continuous light

Connected, IP address assigned, connected to server in TCP Client mode

(flashes when transmitting data)

1 2

SmartCOM Quick Guide 1

Sommario

Pagina 1 - SmartCOM Quick Guide

2N® SmartCOM Quick Guide Read the User Manual carefully to get familiar with all system functions. Security Precautions  Do not switch on 2N® Smart

Pagina 2

Basic 2N®SmartCOM Setup  Insert the SIM card that supports data. Connect the antenna and then the power supply.  2N® SmartCOM will start with

Commenti su questo manuale

Nessun commento

2n M2M Solution 2N SmartCom - Quick guide, 1645 v1.1. Manuale Utente

Navigare online o scaricare Manuale Utente per Accessori per la comunicazione 2n M2M Solution 2N SmartCom - Quick guide, 1645 v1.1.. 2N M2M Solution 2N SmartCom - Quick guide, 1645 v1.1.0 User Manual [en] Manuale Utente

Sommario

Commenti su questo manuale

Prodotti e manuali riguardandi Accessori per la comunicazione 2n M2M Solution 2N SmartCom - Quick guide, 1645 v1.1.