2n Door camera for 2N Helios - Installation manual - Manuale Utente Scaricare il pdf

2ENTRY Helios color video camera kit

Order No. 9135210E

Description

The 2ENTRY Helios color video camera kit contains all necessary items for additional

upgrade of your door communicator. It contains an electronic camera module, movable hinge

and the connection cable for the camera and the communicator’s main board. The video

camera is adjustable both vertically and horizontally due to the movable hinge system. In order

to configure the camera use the appropriate connectors (jumpers) provided in the kit.

!!Warning!!

The video camera shares the power supply with the back light. Before installation make sure

that the parameters of the back light power supply comply with the requirement of the video

camera (see “Technical Parameters” section in the manual). The suitable power supply is

12V/2A stabilized. It is possible to order this power supply by using order number 91341481E.

In no case use AC power supply (mains transformer)!

Installation

1. Remove metal cover from the door phone.

Remove plastic cover from the base by

unscrewing the screws (4x) located at the

corners.

2. Remove the black camera cover and replace it

with the clear cover from the “video kit”.

3. Remove the loudspeaker cradle from the base

by lifting out the pins and pushing the cradle

slightly forward.

4. Assemble the movable hinge and screw (2x) it

to the base. Place the video camera on the top

of the hinge and use provided screws (2x) to

secure (see the figure below).

1 2

2ENTRY Helios color video camera kit Order No. 9135210E Description The 2ENTRY Helios color video camera kit contains all necessary items for additi

5. Connect the camera with the main board using the provided cable. 6. Select the camera mode and video cable type via jumpers. In the "Video

Nessun commento

2n Door camera for 2N Helios - Installation manual - Manuale Utente